R 1001A

Swivel fitting - rotule - for structural bolted glass - countersunk head - Insulated Glass Units

Features
  • Swivel fitting for double or triple insulating glass panes
  • All glass thicknesses and compositions
  • Stainless steel AISI 316
  • Sealing strip and tools supplied by SADEV for sealing the glazing
  • Application: facade or glass roof photovoltaic panels, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc. (to be avoided in suspended version)
  • Several diameters and axis lengths available.
  • High mechanical performance
  • 20° deflection + or – 20°.
  • Absorption of stresses and deformations of the glazing, therefore no stresses in the glass.
  • Standard assembly.
  • Customisation of finishes possible (colour, treatment, dimensions, etc.).
  • Swivel system with backlash recovery
Product code R 1001A
Certificates
* Contact us for more information on certifications in your country
Fixation
Swivel fitting
Drilling type
Milled
Installation type
From inside
Type of glass
Insulation
Dimensions / Type
* Tailored products and solutions on demand

Glass tchickness
Clear Selection
Related accessories

Flush swivel fitting, countersunk head – insulated glass unit.
Application: façade or glass roof.
Standard dimensioons: Ø 14mm, 65 mm length. M16 or M18 on request.
Tailor-made threaded length.
The R1001A rotule can be used on any glass thickness.
Cavity ring according to air gap (from 12.15 to 20).
No technical evaluation for this product.

Glass
Performances
Suggested mounting instruction

1 – In factory : assembly of glass
Suggested method only, not considered to replace the recommendations of the glass manufacturer.
Mount spacing ring N° 12 between the two pieces of glass using 3 mm butyl cord applied into the grooves. Assemble the IG unit. Insert glass hole grommet N° 3 and secure using a neutral cure silicone.

2 – On site
Insert parts N° 1/2 into the glass hole. Place the contact washer N° 4 over assembly N° 1/2 and thread on the glass nut N° 5. Tighten to 10 Nm ( 7.5 ft-lb ) for tempered glass using SADEV catalog ref. 097581160 and ref. CLE-DYN-072031. Thread on nut N° 6 and apply washer N° 7. Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.

SADEV recommends using thread locking compound whenever possible.

Contact us

Contactez-nous

L’entreprise SADEV fait partie d’un groupe international, qui a développé ses activités dans le monde entier.
Vous avez une question ?

Vous pouvez nous l’adressez ici, nos équipes vous répondront dans les plus bref délais.

Contact us

Contact us

SADEV is part of an international group, which has developed its activities all over the world.

Do you have a question?
You can send it to us here, our teams will answer you as soon as possible.

Inscrivez-vous pour être informé des actus SADEV.

Nous nous engageons à ne pas diffuser votre adresse e-mail à des tiers.

Activité(s) :

Vous êtes intéressés par :

Politique de confidentialité

Merci pour votre inscription.

Register to be informed of SADEV news.

We undertake not to distribute your e-mail address to third parties.

Activity(ies):

Interested by:

Privacy policy

Thank you for your suscription.

Regístrese para estar informado de las novedades de SADEV.

Nos comprometemos a no distribuir su dirección de correo electrónico a terceros.

Actividad(es):

Interesado(a) por:

Política de privacidad

Gracias por su suscripción.

Pin It on Pinterest