R 1006
Swivel fitting - rotule - for structural bolted glass -cylindrical head - not flush with glass - blind mounting - technical evaluation - seismic option
AVANTAGES
Accessibility for assembly / disassembly
- Application: Double Skin Façade, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc. (carried and hung)
- Tested and certified by technical evaluation (test report)
- Cylindrical drilling
- Validated all seismic zones
- Several diameters and axis lengths available
- Stainless steel AISI 316
- High mechanical performance
- 20° deflection + or – 20°
- Absorption of stresses and deformations of the glazing, therefore no stresses in the glass.
- Blind mounting: installation from the outside (no access to the structure) or standard mounting
- Customisation of finishes possible (colour, treatment, dimensions, etc.).
- Swivel system with backlash recovery
- Glass: mounting on laminated or monolithic glass
Certificates
* Contact us for more information on certifications in your country
Fixation
Swivel fittingDrilling type
CylindricalInstallation type
By interior and/or exteriorFrom insideType of glass
MonolithicLaminated
Swivel fitting, cylindrical head for installation from the outside.
Application: vertical or inclined façade, glass roof or suspended ceiling.
Installation: blind access (installation from the outside, no access to the structure).
Standard dimension: threaded axle length 65 mm, M 14.
M12, M16 or M18 on request.
Tailor made axles to special order.
Technical evaluation available for R1006.
Glass
Performances
Suggested mounting instruction
A – Classic mounting
Insert parts N° 1/2, 5, 4 and 3 into the glass hole. Mount the second contact washer N° 4 and nut N° 5 and tighten to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass using SADEV tools ref. 097581160 and ref. CLE-DYN-072031. Thread on nut N° 6 and apply washer N° 7. Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.
B – Blind mounting : installation from the outside ( no access to the structure )
Mount nut N° 6 and washer N° 7 onto assembly N° 1/2. Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench. Slide contact washer N° 4 and grommet N° 3 onto swivel body N° 1. Set the glass onto the swivel body, be careful to not contact unprotected glass edges with bare metal parts. Mount the second contact washer N° 4 and nut N° 5 and tighten to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass using SADEV tools ref. 097581160 and ref. CLE-DYN-072031.
SADEV recommends using thread locking compound whenever possible.
Related articles
