R 1106

Swivel fitting - rotule - for structural bolted glass - Non-Flush Cylindrical Head - ø50 mm - for installation from the outside - technical evaluation

Features
  • Tested and certified by technical evaluation (test report)
  • Stainless steel AISI 316
  • Application: facade or glass roof photovoltaic panels, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc. (carried and hunging)
  • 20° deflection + or – 20°.
  • Swivel system with backlash recovery
  • Absorption of stresses and deformations of the glazing, therefore no stresses in the glass.
  • Blind or standard mounting
  • Customization of the finishes possible (color, treatment, dimensions…)
  • Glass: mounting on laminated or monolithic glass
Product code R1106
Certificates
* Contact us for more information on certifications in your country
Fixation
Swivel fitting
Drilling type
CylindricalSpecial
Installation type
By interior and/or exteriorFrom inside
Type of glass
MonolithicLaminated
Dimensions / Type
* Tailored products and solutions on demand

Glass tchickness
Drilling type
Clear Selection
Related accessories

Ø 50 swivel fitting, cylindrical head.
R1106 is a subsitute product for smaller drilling than expected or in case of oversized holes.
Characteristics are close to the R1006 ones.
CSTB technical evaluation available for this product

Glass
Performances
Suggested mounting instruction

A – Classic mounting
Insert parts N° 1/2, 5, 4 and 3 into the glass hole. Place the second contact washer N° 4
over assembly N° 1/2 and thread on glass nut N° 5. Tighten to 10 Nm ( 7.5 ft-lb ) for tempered glass using SADEV catalog ref. 097581160. Thread on nut N° 6 and apply washer N° 7.
Insert the threaded axle into the support with spacer E ( available on request ),
see technical page.
Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9.
Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.

B – Blind mounting : installation from the outside ( no access to the structure )
Mount nut N° 6 and washer N° 7 onto assembly N° 1/2. Insert the threaded axle into the support with spacer E ( available on request ),
see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9. Tighten to 60 Nm ( 45 ft-lb ) using
a 22 mm wrench. Slide contact washer N° 4 and grommet N° 3 onto swivel body N° 1. Set the glass onto the swivel body, careful not
to contact unprotected glass edges with bare metal parts. Place the second contact washer N° 4 over assembly N° 1/2 and thread on glass nut N° 5. Tighten to 10 Nm ( 7.5 ft-lb ) for tempered glass using SADEV catalog ref. 097581160.

SADEV recommends using thread locking compound whenever possible.

Contact us

Contactez-nous

L’entreprise SADEV fait partie d’un groupe international, qui a développé ses activités dans le monde entier.
Vous avez une question ?

Vous pouvez nous l’adressez ici, nos équipes vous répondront dans les plus bref délais.

Contact us

Contact us

SADEV is part of an international group, which has developed its activities all over the world.

Do you have a question?
You can send it to us here, our teams will answer you as soon as possible.

Inscrivez-vous pour être informé des actus SADEV.

Nous nous engageons à ne pas diffuser votre adresse e-mail à des tiers.

Activité(s) :

Vous êtes intéressés par :

Politique de confidentialité

Merci pour votre inscription.

Register to be informed of SADEV news.

We undertake not to distribute your e-mail address to third parties.

Activity(ies):

Interested by:

Privacy policy

Thank you for your suscription.

Regístrese para estar informado de las novedades de SADEV.

Nos comprometemos a no distribuir su dirección de correo electrónico a terceros.

Actividad(es):

Interesado(a) por:

Política de privacidad

Gracias por su suscripción.

Pin It on Pinterest