S 3001 EVO
Spider Fitting - Stainless Steel AISI 316 for Point Fixed Architectural Glass - Technical evaluation - Seismic Option available - streamlined design
AVANTAGES
Aesthetic and economical model
- Application: Double Skin Façade, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc.
- Fixing on all types of structures (metal, wood, glass…)
- Aesthetic and economical model
- Validated all seismic zones
- Small space requirement
- Tested and certified by technical evaluation (test report)
- Stainless steel 316
- Compatible with our omega range (easy adjustment on the structure)
Certificates
* Contact us for more information on certifications in your country
Materials
Stainless steel AISI 316Finishing
Dull polished GR400
Structural bolted Glass fastener
The spiders S3001 EVO combines good mechanical performances and a modern design : This is the S3001 EVO.
S3001 EVO, with brushed standard finish, will provide a seamless design for your upcoming architectural projects, while offering bolted glass system at an affordable price.
Different models available, from one arm (90° and 180°), 2 arms (90° and 180°), 3 and 4 arms.
Distance hole to hole : 204 mm.
Applications:
Glass facade, Glass structure, Canopy, Curtain wall…
This part has been tested and validated in many country around the world . Please contact our technical department for details of these certifications according to your country and project.
Mounting
Suggested mounting instruction
The drilling diameter for the pins is 6 mm. Do not drill the holes for the pins in your structure before mounting the spiders. To fix the spider on your structure the “Omega” ( see accessories ) is highly reco mmended to adjust the spider’s position. The fixing of the spider is done with a M16 or a M12 bolt ( out of Sadev supply ).
This bolt shall not be fitted into a vertical slotted holes due to the risk of slipping ( under the weight ), the pins are not designed to hold any permanent loads ( cf. specification sheet ). The spider has to be positioned on a flat support. The slotted holes Ø 17×24 mm and free holes Ø 24 mm in the spider are not to be used to adjust the spider ! They are needed to absorb the manufacturing tolerances and the thermal deformation of the glass and of the structure. The spiders are standardized for M14 fittings ( FXR, FXV ) ; other diameters are available on request.
SADEV recommends using thread locking compound, except in case of specific mounting constraints.
Performances
Related articles
