Contact us

SADEV is part of an international group, which has developed its activities all over the world.

Do you have a question?
You can send it to us here, our teams will answer you as soon as possible.

Online quote request

Send us your request for a quote in a few clicks:
1 – Select a product and customize it for your project with technical parameters (dimensions, finishes, etc…) then add it to your quote request.
2 – Create your customer account
3 – Finalize your quote request by adding your project plans and your comments then “Validate your request”.
Our technical sales teams will answer you as soon as possible.
You can consult all your quotation requests in your customer account.

Select Page
V 2003

Fixed bolt for structural bolted glass - cylindrical head - for installation from the outside - Cap Nut Options

Features
  • Façade or glass roof
  • Cylindrical drilling
  • Contact washer (railing application)
Product code V2003
Materials
Stainless steel AISI 316
Dimensions / Type
* Tailored products and solutions on demand

Glasses
Clear selection
Related accessories

Fixed bolt, cylindrical head. Installation from the outside (blind access).

Cylindrical drilling.
M14 standard axle.
Length: 65 mm (standard). ⌀ axis : M14 / lenght axis 65 mm / lenght L 40 / lenght X 120±2

V2003 has a contact washer, you can therefore use this fitting for a railing application (this solution is not validated by the french CEBTP testing center).

No technical evaluation for V2003.

Glass

Performances

Suggested mounting instruction

A – Classic mounting
Insert parts No.2/3/4/5 into the glass hole. Mount the second contact washer No.4, external plate No.1, and bolt No.9 and tighten
to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass. Thread on nut No.6 and apply washer No.7.
Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer No.7, lock washer No.8, and nut No.10. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.

B – Blind mounting: installation from the outside ( no access to the structure )
Mount nut No.6 and washer No.7 onto parts No.2/3/4/5. Insert the threaded axle into the support with spacer E ( available on request ),
see technical page. Adjust the depth. Mount the second washer No.7, lock washer No.8, and nut No.10. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench. Set the glass onto the assembly, be careful not to put unprotected glass edges in contact with bare metal parts. Mount parts No.1/4 and 9 onto parts No.2/3/4/5 and tighten to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass using a 10 mm wrench and a 5 mm hex key.

SADEV reco mmends using thread locking compound whenever possible.

Inscrivez-vous pour être informé des actus SADEV.

Nous nous engageons à ne pas diffuser votre adresse e-mail à des tiers.

Activité(s) :

Vous êtes intéressés par :

Politique de confidentialité

Merci pour votre inscription.

Register to be informed of SADEV news.

We undertake not to distribute your e-mail address to third parties.

Activity(ies):

Interested by:

Privacy policy

Thank you for your suscription.

Pin It on Pinterest