Contact us

SADEV is part of an international group, which has developed its activities all over the world.

Do you have a question?
You can send it to us here, our teams will answer you as soon as possible.

Online quote request

Send us your request for a quote in a few clicks:
1 – Select a product and customize it for your project with technical parameters (dimensions, finishes, etc…) then add it to your quote request.
2 – Create your customer account
3 – Finalize your quote request by adding your project plans and your comments then “Validate your request”.
Our technical sales teams will answer you as soon as possible.
You can consult all your quotation requests in your customer account.

Select Page
R 1106

Swivel fitting - rotule - for structural bolted glass - Non-Flush Cylindrical Head - ø50 mm - for installation from the outside - technical evaluation

Features
  • Tested and certified by technical evaluation (test report)
  • Application: facade or glass roof photovoltaic panels, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc. (carried and hunging)
  • 20° deflection + or – 20°.
  • Swivel system with backlash recovery
  • Absorption of stresses and deformations of the glazing, therefore no stresses in the glass.
  • Blind or standard mounting
  • Customization of the finishes possible (color, treatment, dimensions…)
  • Glass: mounting on laminated or monolithic glass
Product code R1106
Certificates
* Contact us for more information on certifications in your country
Materials
Stainless steel AISI 316
Dimensions / Type
* Tailored products and solutions on demand

Glasses
Clear selection
Related accessories

Ø 50 swivel fitting, cylindrical head.
R1106 is a subsitute product for smaller drilling than expected or in case of oversized holes.
Characteristics are close to the R1006 ones.
CSTB technical evaluation available for this product

Glass

Performances

Suggested mounting instruction

A – Classic mounting
Insert parts N° 1/2, 5, 4 and 3 into the glass hole. Place the second contact washer N° 4
over assembly N° 1/2 and thread on glass nut N° 5. Tighten to 10 Nm ( 7.5 ft-lb ) for tempered glass using SADEV catalog ref. 097581160. Thread on nut N° 6 and apply washer N° 7.
Insert the threaded axle into the support with spacer E ( available on request ),
see technical page.
Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9.
Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.

B – Blind mounting : installation from the outside ( no access to the structure )
Mount nut N° 6 and washer N° 7 onto assembly N° 1/2. Insert the threaded axle into the support with spacer E ( available on request ),
see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9. Tighten to 60 Nm ( 45 ft-lb ) using
a 22 mm wrench. Slide contact washer N° 4 and grommet N° 3 onto swivel body N° 1. Set the glass onto the swivel body, careful not
to contact unprotected glass edges with bare metal parts. Place the second contact washer N° 4 over assembly N° 1/2 and thread on glass nut N° 5. Tighten to 10 Nm ( 7.5 ft-lb ) for tempered glass using SADEV catalog ref. 097581160.

SADEV recommends using thread locking compound whenever possible.

Inscrivez-vous pour être informé des actus SADEV.

Nous nous engageons à ne pas diffuser votre adresse e-mail à des tiers.

Activité(s) :

Vous êtes intéressés par :

Politique de confidentialité

Merci pour votre inscription.

Register to be informed of SADEV news.

We undertake not to distribute your e-mail address to third parties.

Activity(ies):

Interested by:

Privacy policy

Thank you for your suscription.

Pin It on Pinterest