Spider Fitting for Point Fixed Architectural Glass - Stainless Steel Duplex Uranus 45N - High Corrosion Resistance - Technical evaluation - streamlined design
- Application: Double Skin Façade, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc.
- Different models available
- Tested and certified by technical evaluation (test report)
- Compatible with swivel and non-swivel rotules, diameters up to 22mm.
- Compatible with our omega range (easy adjustment on the structure)
Structural glass facade
Architectural glass fittings
S3002 casted stainless steel spider
Mechanical performances are quite satisfying.
Different models are available to suit to each project configuration: one arm (90° and 180°), 2 arms (90° and 180°), 3 and 4 arms.
Material : stainless steel Duplex Uranus 45N
Suggested mounting instruction
The drilling diameter for the pins is 6 mm. Do not drill the holes for the pins in your structure before mounting the spiders. To fix the spider on your structure the “Omega” ( see accessories ) is highly reco mmended to adjust the spider’s position. The fixing of the spider is done with a M16 ( out of Sadev supply ).
This bolt shall not be fitted into a vertical slotted holes due to the risk of slipping ( under the weight ), the pins are not designed to hold any permanent loads ( cf. specification sheet ). The spider has to be positioned on a flat support. The slotted holes Ø 17×24 mm and free holes
Ø 24 mm in the spider are not to be used to adjust the spider ! They are needed to absorb the manufacturing tolerances and the thermal deformation of the glass and of the structure. The spiders are standardized for M14 fittings ( FXR, FXV ) ; other diameters are available on request.
SADEV reco mmends using thread locking compound, except in case of specific mounting constraints.