V 2003
Fixed bolt for structural bolted glass - cylindrical head - for installation from the outside - Cap Nut Options
Features
- Application: Double skin facade, awnings, canopies, etc. (carried and hunging)
- Cylindrical drilling
- Glass thickness : 06 mm to 26mm
- Stainless steel AISI 316
- Several diameters and axis lengths available.
- High mechanical performance
- Standard mounting
- Customization of the finishes possible (color, treatment, dimensions…)
- Glass: mounting on laminated or monolithic glass
Drilling type
CylindricalInstallation type
By interior and/or exteriorFrom insideType of glass
MonolithicLaminated
Fixed bolt, cylindrical head. Installation from the outside (blind access).
Cylindrical drilling.
M14 standard axle.
Length: 65 mm (standard). ⌀ axis : M14 / lenght axis 65 mm / lenght L 40 / lenght X 120±2
V2003 has a contact washer, you can therefore use this fitting for a railing application (this solution is not validated by the french CEBTP testing center).
No technical evaluation for V2003.
Glass
Performances
Suggested mounting instruction
A – Classic mounting
Insert parts No.2/3/4/5 into the glass hole. Mount the second contact washer No.4, external plate No.1, and bolt No.9 and tighten
to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass. Thread on nut No.6 and apply washer No.7.
Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer No.7, lock washer No.8, and nut No.10. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.
B – Blind mounting: installation from the outside ( no access to the structure )
Mount nut No.6 and washer No.7 onto parts No.2/3/4/5. Insert the threaded axle into the support with spacer E ( available on request ),
see technical page. Adjust the depth. Mount the second washer No.7, lock washer No.8, and nut No.10. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench. Set the glass onto the assembly, be careful not to put unprotected glass edges in contact with bare metal parts. Mount parts No.1/4 and 9 onto parts No.2/3/4/5 and tighten to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass using a 10 mm wrench and a 5 mm hex key.
SADEV reco mmends using thread locking compound whenever possible.
Related articles
