Spider Fitting - Stainless Steel AISI 316 for Point Fixed Architectural Glass - Technical evaluation - Seismic Option available - streamlined design
Aesthetic and economical model
- Application: Double Skin Façade, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc.
- Fixing on all types of structures (metal, wood, glass…)
- Aesthetic and economical model
- Validated all seismic zones
- Small space requirement
- Tested and certified by technical evaluation (test report)
- Stainless steel 316
- Compatible with our omega range (easy adjustment on the structure)
Structural bolted Glass fastener
The spiders S3001 EVO combines good mechanical performances and a modern design : This is the S3001 EVO.
S3001 EVO, with brushed standard finish, will provide a seamless design for your upcoming architectural projects, while offering bolted glass system at an affordable price.
Different models available, from one arm (90° and 180°), 2 arms (90° and 180°), 3 and 4 arms.
Distance hole to hole : 204 mm.
Glass facade, Glass structure, Canopy, Curtain wall…
This part has been tested and validated in many country around the world . Please contact our technical department for details of these certifications according to your country and project.
Suggested mounting instruction
The drilling diameter for the pins is 6 mm. Do not drill the holes for the pins in your structure before mounting the spiders. To fix the spider on your structure the “Omega” ( see accessories ) is highly reco mmended to adjust the spider’s position. The fixing of the spider is done with a M16 or a M12 bolt ( out of Sadev supply ).
This bolt shall not be fitted into a vertical slotted holes due to the risk of slipping ( under the weight ), the pins are not designed to hold any permanent loads ( cf. specification sheet ). The spider has to be positioned on a flat support. The slotted holes Ø 17×24 mm and free holes Ø 24 mm in the spider are not to be used to adjust the spider ! They are needed to absorb the manufacturing tolerances and the thermal deformation of the glass and of the structure. The spiders are standardized for M14 fittings ( FXR, FXV ) ; other diameters are available on request.
SADEV recommends using thread locking compound, except in case of specific mounting constraints.