R 1006

Swivel fitting - rotule - for structural bolted glass -cylindrical head - not flush with glass - blind mounting - technical evaluation - seismic option

AVANTAGES

Accessibility for assembly / disassembly

Features
  • Application: Double Skin Façade, point fixed facade, curtain wall, solar shading, glass elevator, awnings, canopies, etc. (carried and hung)
  • Tested and certified by technical evaluation (test report)
  • Cylindrical drilling
  • Validated all seismic zones
  • Several diameters and axis lengths available
  • Stainless steel AISI 316
  • High mechanical performance
  • 20° deflection + or – 20°
  • Absorption of stresses and deformations of the glazing, therefore no stresses in the glass.
  • Blind mounting: installation from the outside (no access to the structure) or standard mounting
  • Customisation of finishes possible (colour, treatment, dimensions, etc.).
  • Swivel system with backlash recovery
  • Glass: mounting on laminated or monolithic glass
Product code R 1006
Certificates
* Contact us for more information on certifications in your country
Fixation
Swivel fitting
Drilling type
Cylindrical
Installation type
By interior and/or exteriorFrom inside
Type of glass
MonolithicLaminated
Dimensions / Type
* Tailored products and solutions on demand
Glass tchickness
Installation type
Clear Selection
Related accessories

Swivel fitting, cylindrical head for installation from the outside.
Application: vertical or inclined façade, glass roof or suspended ceiling.
Installation: blind access (installation from the outside, no access to the structure).
Standard dimension: threaded axle length 65 mm, M 14.
M12, M16 or M18 on request.
Tailor made axles to special order.
Technical evaluation available for R1006.

Glass
Performances
Suggested mounting instruction

A – Classic mounting
Insert parts N° 1/2, 5, 4 and 3 into the glass hole. Mount the second contact washer N° 4 and nut N° 5 and tighten to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass using SADEV tools ref. 097581160 and ref. CLE-DYN-072031. Thread on nut N° 6 and apply washer N° 7. Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.

B – Blind mounting : installation from the outside ( no access to the structure )
Mount nut N° 6 and washer N° 7 onto assembly N° 1/2. Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer N° 7, lock washer N° 8, and nut N° 9. Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench. Slide contact washer N° 4 and grommet N° 3 onto swivel body N° 1. Set the glass onto the swivel body, be careful to not contact unprotected glass edges with bare metal parts. Mount the second contact washer N° 4 and nut N° 5 and tighten to 20 Nm ( 15 ft-lb ) for monolithic glass and 10 Nm ( 7.5 ft-lb ) for laminated glass using SADEV tools ref. 097581160 and ref. CLE-DYN-072031.

SADEV recommends using thread locking compound whenever possible.

Contactarnos

Contactarnos

 

¿Desea un presupuesto?

¿Necesita ayuda con un proyecto?

 

Nuestros equipos están a su disposición y se pondrán en contacto con usted lo antes posible.

Contact us

Contactez-nous

 

Vous souhaitez un devis ?

Vous avez besoin d'aide pour un projet ?

 

Nos équipes sont à votre disposition et vous répondront dans les plus bref délais.

 

Contact us

Contact us

 

Would you like a quote?

Do you need help with a project?

 

Our teams are at your disposal and will get back to you as soon as possible.

 

Inscrivez-vous pour être informé des actus SADEV.

Nous nous engageons à ne pas diffuser votre adresse e-mail à des tiers.

Merci pour votre inscription.

 

Register to be informed of SADEV news.

We undertake not to distribute your e-mail address to third parties.

Thank you for your suscription.

Regístrese para estar informado de las novedades de SADEV.

Nos comprometemos a no distribuir su dirección de correo electrónico a terceros.

Gracias por su suscripción.

Pin It on Pinterest