Swivel fitting - rotule - for structural bolted glass - cylindrical head - for installation from the outside - Ø16 mm drilling
- Drilling in reduced glass (Ø16 mm)
- Application: Façade, canopy, awning (carried and hung)
- Several diameters and axis lengths available.
- High mechanical performance
- Stainless steel AISI 316
- 20° deflection + or – 20°.
- Absorption of stresses and deformations of the glazing, therefore no stresses in the glass.
- Blind mounting: installation from the outside (no access to the structure) or standard mounting
- Customization of finishes possible (color, treatment, dimensions…)
- Swivel system with backlash recovery
- Glass: mounting on laminated or monolithic glass
Swivel fitting, cylindrical head.
Installation from the outside possible for this swivel fittings.
Bespoke glass thickness.
Contact us for more information.
A – Classic mounting
Insert parts N° 1, 3, 4 and 3 into the glass hole. Place the second contact washer N° 5 over assembly N° 2 and thread on glass nut N° 6. Tighten to 20 Nm for tempered glass using SADEV catalog ref. 097581160. Thread on nut N° 7 and apply washer N° 8.
Insert the threaded axle into the support with spacer E ( available on request ), see technical page.
Adjust the depth. Mount the second washer N° 8, lock washer N° 9, and nut N° 7.
Tighten to 60 Nm ( 45 ft-lb ) using a 22 mm wrench.
B – Blind mounting : installation from the outside ( N° access to the structure )
Mount nut N° 7 and washer N° 8 onto assembly N° 1,3,4. Insert the threaded axle into the support with spacer E ( available on request ), see technical page. Adjust the depth. Mount the second washer N° 8, lock washer N° 9, and nut N° 7. Tighten to 60 Nm ( 45 ft-lb ) using
a 22 mm wrench.
Mount the glazing.
Mount contact washer N° 8 + plate N° 2 with screw M8 N° 6 and tighten to 20 Nm for monolithic glass and 10 Nm for laminated glass using SADEV catalog ref. 097581160.
SADEV recommends using thread locking, except specific mounting constraint.